Install ReportPortal

Inspect the prerequisites and the main steps to perform for installing ReportPortal.

Prerequisites

• Kubectl version 1.29.0+ is installed. Please refer to the Kubernetes official website for details.
• Helm version 3.14.0+ is installed. Please refer to the Helm page on GitHub for details.

info

Please refer to the ReportPortal Helm Chart section for details.

MinIO Installation

To install MinIO, follow the steps below:

1. Check that edp namespace is created. If not, run the following command to create it:

   kubectl create namespace edp
   For the OpenShift users

   When using the OpenShift platform, install the SecurityContextConstraints resources.
   In case of using a custom namespace for the reportportal, change the namespace in the users section.

   View: report-portal-third-party-resources-scc.yaml

   apiVersion: security.openshift.io/v1
   kind: SecurityContextConstraints
   metadata:
     annotations:
       "helm.sh/hook": "pre-install"
     name: report-portal-minio-rabbitmq-postgresql
   allowHostDirVolumePlugin: false
   allowHostIPC: false
   allowHostNetwork: false
   allowHostPID: false
   allowHostPorts: false
   allowPrivilegeEscalation: true
   allowPrivilegedContainer: false
   allowedCapabilities: null
   allowedFlexVolumes: []
   defaultAddCapabilities: []
   fsGroup:
     type: MustRunAs
     ranges:
       - min: 999
         max: 65543
   groups: []
   priority: 1
   readOnlyRootFilesystem: false
   requiredDropCapabilities:
     - KILL
     - MKNOD
     - SETUID
     - SETGID
   runAsUser:
     type: MustRunAsRange
     uidRangeMin: 1
     uidRangeMax: 65543
   seLinuxContext:
     type: MustRunAs
   supplementalGroups:
     type: RunAsAny
   users:
     - system:serviceaccount:report-portal:minio
     - system:serviceaccount:report-portal:rabbitmq
     - system:serviceaccount:report-portal:postgresql
   volumes:
     - configMap
     - downwardAPI
     - emptyDir
     - persistentVolumeClaim
     - projected
     - secret
   View: report-portal-elasticsearch-scc.yaml

   apiVersion: security.openshift.io/v1
   kind: SecurityContextConstraints
   metadata:
     annotations:
       "helm.sh/hook": "pre-install"
     name: report-portal-elasticsearch
   allowHostDirVolumePlugin: false
   allowHostIPC: false
   allowHostNetwork: false
   allowHostPID: false
   allowHostPorts: false
   allowPrivilegedContainer: true
   allowedCapabilities: []
   allowedFlexVolumes: []
   defaultAddCapabilities: []
   fsGroup:
     type: MustRunAs
     ranges:
       - max: 1000
         min: 1000
   groups: []
   priority: 0
   readOnlyRootFilesystem: false
   requiredDropCapabilities: []
   runAsUser:
     type: MustRunAsRange
     uidRangeMax: 1000
     uidRangeMin: 0
   seLinuxContext:
     type: MustRunAs
   supplementalGroups:
     type: RunAsAny
   users:
     - system:serviceaccount:report-portal:elasticsearch-master
   volumes:
     - configMap
     - downwardAPI
     - emptyDir
     - persistentVolumeClaim
     - projected
     - secret

2. Add a chart repository:

   helm repo add bitnami https://charts.bitnami.com/bitnami
   helm repo update

3. Create MinIO admin secret:

   kubectl -n edp create secret generic reportportal-minio-creds \
   --from-literal=root-password=<root_password> \
   --from-literal=root-user=<root_user>

4. Install MinIO v.11.10.3 using bitnami/minio Helm chart v.11.10.3:

   helm install minio bitnami/minio \
   --version 11.10.3 \
   --values values.yaml \
   --namespace edp

   Check out the values.yaml file sample of the MinIO customization:

   View: values.yaml

   auth:
     existingSecret: reportportal-minio-creds
   persistence:
     size: 1Gi

RabbitMQ Installation

To install RabbitMQ, follow the steps below:

1. Use edp namespace from the MinIO installation.

2. Use bitnami chart repository from the MinIO installation.

3. Create RabbitMQ admin secret:

   kubectl -n edp create secret generic reportportal-rabbitmq-creds \
   --from-literal=rabbitmq-password=<rabbitmq_password> \
   --from-literal=rabbitmq-erlang-cookie=<rabbitmq_erlang_cookie>
   warning

   The rabbitmq_password password must be 10 characters long.
   The rabbitmq_erlang_cookie password must be 32 characters long.

4. Install RabbitMQ v.10.3.8 using bitnami/rabbitmq Helm chart v.10.3.8:

   helm install rabbitmq bitnami/rabbitmq \
   --version 10.3.8 \
   --values values.yaml \
   --namespace edp

   Check out the values.yaml file sample of the RabbitMQ customization:

   View: values.yaml

   auth:
     existingPasswordSecret: reportportal-rabbitmq-creds
     existingErlangSecret: reportportal-rabbitmq-creds
   persistence:
     size: 1Gi

5. After the rabbitmq pod gets the status Running, you need to configure the RabbitMQ memory threshold

   kubectl -n edp exec -it rabbitmq-0 -- rabbitmqctl set_vm_memory_high_watermark 0.8

Elasticsearch Installation

To install Elasticsearch, follow the steps below:

1. Use edp namespace from the MinIO installation.

2. Add a chart repository:

   helm repo add elastic https://helm.elastic.co
   helm repo update

3. Install Elasticsearch v.7.17.3 using elastic/elasticsearch Helm chart v.7.17.3:

   helm install elasticsearch elastic/elasticsearch \
   --version 7.17.3 \
   --values values.yaml \
   --namespace edp

   Check out the values.yaml file sample of the Elasticsearch customization:

   View: values.yaml

   replicas: 1
   
   extraEnvs:
     - name: discovery.type
       value: single-node
     - name: cluster.initial_master_nodes
       value: ""
   
   rbac:
     create: true
   
   resources:
     requests:
       cpu: "100m"
       memory: "2Gi"
   
   volumeClaimTemplate:
     resources:
       requests:
         storage: 3Gi

PostgreSQL Installation

To install PostgreSQL, follow the steps below:

1. Use edp namespace from the MinIO installation.

2. Add a chart repository:

   helm repo add bitnami-archive https://raw.githubusercontent.com/bitnami/charts/archive-full-index/bitnami
   helm repo update

3. Create PostgreSQL admin secret:

   kubectl -n edp create secret generic reportportal-postgresql-creds \
   --from-literal=postgresql-password=<postgresql_password> \
   --from-literal=postgresql-postgres-password=<postgresql_postgres_password>
   warning

   The postgresql_password and postgresql_postgres_password passwords must be 16 characters long.

4. Install PostgreSQL v.10.9.4 using Helm chart v.10.9.4:

   helm install postgresql bitnami-archive/postgresql \
   --version 10.9.4 \
   --values values.yaml \
   --namespace edp

   Check out the values.yaml file sample of the PostgreSQL customization:

   View: values.yaml

   persistence:
     size: 1Gi
   resources:
     requests:
       cpu: "100m"
   serviceAccount:
     enabled: true
   postgresqlUsername: "rpuser"
   postgresqlDatabase: "reportportal"
   existingSecret: "reportportal-postgresql-creds"
   initdbScripts:
     init_postgres.sh: |
       #!/bin/sh
       /opt/bitnami/postgresql/bin/psql -U postgres -d ${POSTGRES_DB} -c 'CREATE EXTENSION IF NOT EXISTS ltree; CREATE EXTENSION IF NOT EXISTS pgcrypto; CREATE EXTENSION IF NOT EXISTS pg_trgm;'

ReportPortal Installation

To install ReportPortal, follow the steps below:

1. Use edp namespace from the MinIO installation.

   For the OpenShift users

   When using the OpenShift platform, install the SecurityContextConstraints resource.
   In case of using a custom namespace for the reportportal, change the namespace in the users section.

   View: report-portal-reportportal-scc.yaml

   apiVersion: security.openshift.io/v1
   kind: SecurityContextConstraints
   metadata:
     annotations:
       "helm.sh/hook": "pre-install"
     name: report-portal
   allowHostDirVolumePlugin: false
   allowHostIPC: false
   allowHostNetwork: false
   allowHostPID: false
   allowHostPorts: false
   allowPrivilegedContainer: true
   allowedCapabilities: []
   allowedFlexVolumes: []
   defaultAddCapabilities: []
   fsGroup:
     type: MustRunAs
     ranges:
       - max: 1000
         min: 1000
   groups: []
   priority: 0
   readOnlyRootFilesystem: false
   requiredDropCapabilities: []
   runAsUser:
     type: MustRunAsRange
     uidRangeMax: 1000
     uidRangeMin: 0
   seLinuxContext:
     type: MustRunAs
   supplementalGroups:
     type: RunAsAny
   users:
     - system:serviceaccount:report-portal:reportportal
   volumes:
     - configMap
     - downwardAPI
     - emptyDir
     - persistentVolumeClaim
     - projected
     - secret

2. Add a chart repository:

   helm repo add report-portal "https://reportportal.github.io/kubernetes"
   helm repo update

3. Install ReportPortal v.5.8.0 using Helm chart v.5.8.0:

   helm install report-portal report-portal/reportportal \
   --values values.yaml \
   --namespace edp

   Check out the values.yaml file sample of the ReportPortal customization:

   View: values.yaml

   serviceindex:
     resources:
       requests:
         cpu: 50m
   uat:
     resources:
       requests:
         cpu: 50m
   serviceui:
     resources:
       requests:
         cpu: 50m
     serviceAccountName: "reportportal"
     securityContext:
       runAsUser: 0
   serviceapi:
     resources:
       requests:
         cpu: 50m
   serviceanalyzer:
     resources:
       requests:
         cpu: 50m
   serviceanalyzertrain:
     resources:
       requests:
         cpu: 50m
   
   rabbitmq:
     SecretName: "reportportal-rabbitmq-creds"
     endpoint:
       address: rabbitmq.<EDP_PROJECT>.svc.cluster.local
       user: user
       apiuser: user
   
   postgresql:
     SecretName: "reportportal-postgresql-creds"
     endpoint:
       address: postgresql.<EDP_PROJECT>.svc.cluster.local
   
   elasticsearch:
   endpoint: http://elasticsearch-master.<EDP_PROJECT>.svc.cluster.local:9200
   
   minio:
     secretName: "reportportal-minio-creds"
     endpoint: http://minio.<EDP_PROJECT>.svc.cluster.local:9000
     endpointshort: minio.<EDP_PROJECT>.svc.cluster.local:9000
     accesskeyName: "root-user"
     secretkeyName: "root-password"
   
   ingress:
     # IF YOU HAVE SOME DOMAIN NAME SET INGRESS.USEDOMAINNAME to true
     usedomainname: true
     hosts:
       - report-portal-<EDP_PROJECT>.<ROOT_DOMAIN>

4. For the OpenShift platform, install a Gateway with Route:

   View: gateway-config-cm.yaml

   kind: ConfigMap
   metadata:
     name: gateway-config
     namespace: report-portal
   apiVersion: v1
   data:
     traefik-dynamic-config.yml: |
       http:
           middlewares:
             strip-ui:
               stripPrefix:
                 prefixes:
                   - "/ui"
                 forceSlash: false
             strip-api:
               stripPrefix:
                 prefixes:
                   - "/api"
                 forceSlash: false
             strip-uat:
               stripPrefix:
                 prefixes:
                   - "/uat"
                 forceSlash: false
   
           routers:
             index-router:
               rule: "Path(`/`)"
               service: "index"
             ui-router:
               rule: "PathPrefix(`/ui`)"
               middlewares:
               - strip-ui
               service: "ui"
             uat-router:
               rule: "PathPrefix(`/uat`)"
               middlewares:
               - strip-uat
               service: "uat"
             api-router:
               rule: "PathPrefix(`/api`)"
               middlewares:
               - strip-api
               service: "api"
   
           services:
             uat:
               loadBalancer:
                 servers:
                 - url: "http://report-portal-reportportal-uat:9999/"
   
             index:
               loadBalancer:
                 servers:
                 - url: "http://report-portal-reportportal-index:8080/"
   
             api:
               loadBalancer:
                 servers:
                 - url: "http://report-portal-reportportal-api:8585/"
   
             ui:
               loadBalancer:
                 servers:
                 - url: "http://report-portal-reportportal-ui:8080/"
     traefik.yml: |
       entryPoints:
         http:
         address: ":8081"
         metrics:
         address: ":8082"
   
       metrics:
         prometheus:
           entryPoint: metrics
           addEntryPointsLabels: true
           addServicesLabels: true
           buckets:
             - 0.1
             - 0.3
             - 1.2
             - 5.0
       providers:
         file:
           filename: /etc/traefik/traefik-dynamic-config.yml
   View: gateway-deployment.yaml

   apiVersion: apps/v1
   kind: Deployment
   metadata:
     labels:
       app: reportportal
     name: gateway
     namespace: report-portal
   spec:
     replicas: 1
     selector:
       matchLabels:
         component: gateway
     template:
       metadata:
         labels:
           component: gateway
       spec:
         containers:
           - image: quay.io/waynesun09/traefik:2.3.6
             name: traefik
             ports:
               - containerPort: 8080
                 protocol: TCP
             resources: {}
             volumeMounts:
               - mountPath: /etc/traefik/
                 name: config
                 readOnly: true
         volumes:
           - name: config
             configMap:
               defaultMode: 420
               name: gateway-config
   View: gateway-route.yaml

   kind: Route
   apiVersion: route.openshift.io/v1
   metadata:
     labels:
       app: reportportal
     name: reportportal
     namespace: report-portal
   spec:
     host: report-portal.<CLUSTER_DOMAIN>
     port:
       targetPort: http
     tls:
       insecureEdgeTerminationPolicy: Redirect
       termination: edge
     to:
       kind: Service
       name: gateway
       weight: 100
     wildcardPolicy: None
   View: gateway-service.yaml

   apiVersion: v1
   kind: Service
   metadata:
     labels:
       app: reportportal
       component: gateway
     name: gateway
     namespace: report-portal
   spec:
     ports:
       # use 8081 to allow for usage of the dashboard which is on port 8080
       - name: http
         port: 8081
         protocol: TCP
         targetPort: 8081
     selector:
       component:  gateway
     sessionAffinity: None
     type: ClusterIP

note

For user access: default/1q2w3e
For admin access: superadmin/erebus
Please refer to the ReportPortal.io page for details.

note

It is also possible to install ReportPortal via cluster add-ons. For details, please refer to the Install via Add-Ons page.

Related Articles

• Install KubeRocketCI
• Install via AWS Marketplace
• Install via Civo Marketplace
• Install via Add-Ons