Version: 3.11-dev

Upgrade EDP v3.1 to 3.2

warning

We suggest making a backup of the EDP environment before starting the upgrade procedure.

This section provides the details on the EDP upgrade to v3.2.2. Explore the actions and requirements below.

Update Custom Resource Definitions (CRDs). Run the following command to apply all necessary CRDs to the cluster:

kubectl apply -f https://raw.githubusercontent.com/epam/edp-codebase-operator/v2.15.0/deploy-templates/crds/v2.edp.epam.com_cdstagedeployments.yaml
kubectl apply -f https://raw.githubusercontent.com/epam/edp-codebase-operator/v2.15.0/deploy-templates/crds/v2.edp.epam.com_codebasebranches.yaml
kubectl apply -f https://raw.githubusercontent.com/epam/edp-codebase-operator/v2.15.0/deploy-templates/crds/v2.edp.epam.com_codebaseimagestreams.yaml
kubectl apply -f https://raw.githubusercontent.com/epam/edp-codebase-operator/v2.15.0/deploy-templates/crds/v2.edp.epam.com_codebases.yaml
kubectl apply -f https://raw.githubusercontent.com/epam/edp-codebase-operator/v2.15.0/deploy-templates/crds/v2.edp.epam.com_gitservers.yaml
kubectl apply -f https://raw.githubusercontent.com/epam/edp-codebase-operator/v2.15.0/deploy-templates/crds/v2.edp.epam.com_gittags.yaml
kubectl apply -f https://raw.githubusercontent.com/epam/edp-codebase-operator/v2.15.0/deploy-templates/crds/v2.edp.epam.com_imagestreamtags.yaml
kubectl apply -f https://raw.githubusercontent.com/epam/edp-codebase-operator/v2.15.0/deploy-templates/crds/v2.edp.epam.com_jiraissuemetadatas.yaml
kubectl apply -f https://raw.githubusercontent.com/epam/edp-codebase-operator/v2.15.0/deploy-templates/crds/v2.edp.epam.com_jiraservers.yaml
kubectl apply -f https://raw.githubusercontent.com/epam/edp-jenkins-operator/v2.14.0/deploy-templates/crds/v2.edp.epam.com_cdstagejenkinsdeployments.yaml
kubectl apply -f https://raw.githubusercontent.com/epam/edp-jenkins-operator/v2.14.0/deploy-templates/crds/v2.edp.epam.com_jenkins.yaml
kubectl apply -f https://raw.githubusercontent.com/epam/edp-jenkins-operator/v2.14.0/deploy-templates/crds/v2.edp.epam.com_jenkinsagents.yaml
kubectl apply -f https://raw.githubusercontent.com/epam/edp-jenkins-operator/v2.14.0/deploy-templates/crds/v2.edp.epam.com_jenkinsauthorizationrolemappings.yaml
kubectl apply -f https://raw.githubusercontent.com/epam/edp-jenkins-operator/v2.14.0/deploy-templates/crds/v2.edp.epam.com_jenkinsauthorizationroles.yaml
kubectl apply -f https://raw.githubusercontent.com/epam/edp-jenkins-operator/v2.14.0/deploy-templates/crds/v2.edp.epam.com_jenkinsfolders.yaml
kubectl apply -f https://raw.githubusercontent.com/epam/edp-jenkins-operator/v2.14.0/deploy-templates/crds/v2.edp.epam.com_jenkinsjobbuildruns.yaml
kubectl apply -f https://raw.githubusercontent.com/epam/edp-jenkins-operator/v2.14.0/deploy-templates/crds/v2.edp.epam.com_jenkinsjobs.yaml
kubectl apply -f https://raw.githubusercontent.com/epam/edp-jenkins-operator/v2.14.0/deploy-templates/crds/v2.edp.epam.com_jenkinsscripts.yaml
kubectl apply -f https://raw.githubusercontent.com/epam/edp-jenkins-operator/v2.14.0/deploy-templates/crds/v2.edp.epam.com_jenkinsserviceaccounts.yaml
kubectl apply -f https://raw.githubusercontent.com/epam/edp-jenkins-operator/v2.14.0/deploy-templates/crds/v2.edp.epam.com_jenkinssharedlibraries.yaml
kubectl apply -f https://raw.githubusercontent.com/epam/edp-component-operator/v0.13.0/deploy-templates/crds/v1.edp.epam.com_edpcomponents.yaml
kubectl apply -f https://raw.githubusercontent.com/epam/edp-cd-pipeline-operator/v2.14.1/deploy-templates/crds/v2.edp.epam.com_cdpipelines.yaml
kubectl apply -f https://raw.githubusercontent.com/epam/edp-cd-pipeline-operator/v2.14.1/deploy-templates/crds/v2.edp.epam.com_stages.yaml
kubectl apply -f https://raw.githubusercontent.com/epam/edp-nexus-operator/v2.14.1/deploy-templates/crds/v2.edp.epam.com_nexuses.yaml
kubectl apply -f https://raw.githubusercontent.com/epam/edp-nexus-operator/v2.14.1/deploy-templates/crds/v2.edp.epam.com_nexususers.yaml
kubectl apply -f https://raw.githubusercontent.com/epam/edp-sonar-operator/v2.14.0/deploy-templates/crds/v2.edp.epam.com_sonargroups.yaml
kubectl apply -f https://raw.githubusercontent.com/epam/edp-sonar-operator/v2.14.0/deploy-templates/crds/v2.edp.epam.com_sonarpermissiontemplates.yaml
kubectl apply -f https://raw.githubusercontent.com/epam/edp-sonar-operator/v2.14.0/deploy-templates/crds/v2.edp.epam.com_sonars.yaml
kubectl apply -f https://raw.githubusercontent.com/epam/edp-gerrit-operator/v2.14.0/deploy-templates/crds/v2.edp.epam.com_gerritgroupmembers.yaml
kubectl apply -f https://raw.githubusercontent.com/epam/edp-gerrit-operator/v2.14.0/deploy-templates/crds/v2.edp.epam.com_gerritgroups.yaml
kubectl apply -f https://raw.githubusercontent.com/epam/edp-gerrit-operator/v2.14.0/deploy-templates/crds/v2.edp.epam.com_gerritmergerequests.yaml
kubectl apply -f https://raw.githubusercontent.com/epam/edp-gerrit-operator/v2.14.0/deploy-templates/crds/v2.edp.epam.com_gerritprojectaccesses.yaml
kubectl apply -f https://raw.githubusercontent.com/epam/edp-gerrit-operator/v2.14.0/deploy-templates/crds/v2.edp.epam.com_gerritprojects.yaml
kubectl apply -f https://raw.githubusercontent.com/epam/edp-gerrit-operator/v2.14.0/deploy-templates/crds/v2.edp.epam.com_gerritreplicationconfigs.yaml
kubectl apply -f https://raw.githubusercontent.com/epam/edp-gerrit-operator/v2.14.0/deploy-templates/crds/v2.edp.epam.com_gerrits.yaml
kubectl apply -f https://raw.githubusercontent.com/epam/edp-perf-operator/v2.13.0/deploy-templates/crds/v2.edp.epam.com_perfdatasourcegitlabs.yaml
kubectl apply -f https://raw.githubusercontent.com/epam/edp-perf-operator/v2.13.0/deploy-templates/crds/v2.edp.epam.com_perfdatasourcejenkinses.yaml
kubectl apply -f https://raw.githubusercontent.com/epam/edp-perf-operator/v2.13.0/deploy-templates/crds/v2.edp.epam.com_perfdatasourcesonars.yaml
kubectl apply -f https://raw.githubusercontent.com/epam/edp-perf-operator/v2.13.0/deploy-templates/crds/v2.edp.epam.com_perfservers.yaml

Generate a cookie-secret for proxy with the following command:

nexus_proxy_cookie_secret=$(openssl rand -base64 32 | head -c 32)

Create nexus-proxy-cookie-secret in the <edp-project> namespace:

kubectl -n <edp-project> create secret generic nexus-proxy-cookie-secret \
    --from-literal=cookie-secret=${nexus_proxy_cookie_secret}

EDP 3.2.2 features OIDC configuration for EDP Portal. If this parameter is required, create keycloak-client-headlamp-secret as described in this article:

kubectl -n <edp-project> create secret generic keycloak-client-edp-portal-secret \
    --from-literal=clientSecret=<keycloak_client_secret_key>

Delete the following resources:

kubectl -n <edp-project> delete KeycloakClient nexus
kubectl -n <edp-project> delete EDPComponent nexus
kubectl -n <edp-project> delete Ingress nexus
kubectl -n <edp-project> delete deployment edp-tekton-dashboard

EDP release 3.2.2 uses the default cluster storageClass and we must check previous storageClass parameters. Align , if required, the storageClassName in EDP values.yaml to the same that were used by EDP PVC. For example:

edp-tekton:
  buildTool:
    go:
      cache:
        persistentVolume:
          # -- Specifies storageClass type. If not specified, a default storageClass for go-cache volume is used
          storageClass: ebs-sc

jenkins-operator:
  enabled: true
  jenkins:
    storage:
      # -- Storageclass for Jenkins data volume
      class: gp2

sonar-operator:
  sonar:
    storage:
      data:
        # --  Storageclass for Sonar data volume
        class: gp2
      database:
        # --  Storageclass for database data volume
        class: gp2

gerrit-operator:
  gerrit:
    storage:
      # --  Storageclass for Gerrit data volume
      class: gp2

nexus-operator:
  nexus:
    storage:
      # --  Storageclass for Nexus data volume
      class: gp2

To upgrade EDP to the v3.2.2, run the following command:
```
helm upgrade edp epamedp/edp-install -n <edp-namespace> --values values.yaml --version=3.2.2
```
note
To verify the installation, it is possible to test the deployment before applying it to the cluster with the following command:
helm upgrade edp epamedp/edp-install -n <edp-namespace> --values values.yaml --version=3.2.2 --dry-run